Charging the Lightbug Zero is a simple as charging your mobile phone. 

1. Attach the Lightbug Zero to the included USB cable using the MicroUSB charging port

2. Plug the USB cable into a USB port or connect it to a wall adapter to plug it into a plug socket. 

Note: It is advisable to use an adapter plugged into a power socket rather than using a computer USB port or similar.

3. The LEDs on the Lightbug Zero will turn on while the device is charging

4. Once the device is fully charged, the LEDs will turn off (approximate charging time: 2 hours). 

If you have any additional questions about charging your Lightbug Zero, don't be afraid to reach out to us!